| Test
# |
Test
Description |
| A |
370 |
Test
Methods and Definition for Mechanical Testing of Steel Products (Bend
Test) |
| A |
497 |
Specifications
for Steel Welded Wire Fabric - Shear Strength |
| A |
931 |
Test
Method for Tension Testing of Wire Ropes and Strand |
| |
|
|
| B |
3 |
Specification
for Soft or Annealed Copper Wire |
| B |
533 |
Test
Methods for Peel Strength of Metal Electroplated Plastics |
| B |
557 |
Test
Methods for Tension Testing Wrought and Cast Aluminum and Magnesium
- Alloy Products |
| |
|
|
| C |
67 |
Test
Methods of Sampling & Testing Brick & Structural Clay Tile |
| C |
120 |
Test
Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of
Elasticity) |
| C |
158 |
Test
Methods of Glass by Flexuremination of Modulus of Rupture |
| C |
165 |
Test
method for Measuring Compressive Properties of Thermal Insulations |
| C |
190 |
Test
method for Tensile Strength of Hydraulic Cement Mortars (Discontinued
1991) C-307 is similar |
| C |
203 |
Test
methods Breaking Load & Flexural Properties of Block-Type Thermal
Insulation |
| C |
273 |
Test
method for Shear Properties of Sandwich Core Materials |
| C |
297 |
Test
method for Flatwise Tensile Strength of Sandwich Constructions |
| C |
307 |
Test
method for Tensile Strength of Chemical-Resistant Mortar, Grouts, &
Monolithic Surfacing |
| C |
354 |
Test
Method for Compressive Strength of Thermal Insulating or Finishing Cement |
| C |
365 |
Test
method for Flatwise Compressive Properties of Sandwich Cores |
| C |
393 |
Test
Methods for Flexural Properties of Flat Sandwich Constructions |
| C |
473 |
Test
Methods for Physical Testing of Gypsum Board Products & Gypsum Lathe |
| C |
495 |
Test
Methods for Compressive Strength of Lightweight Insulating Concrete |
| C |
565 |
Test
method for Tension Testing of Carbon and Graphite Mechanical Materials |
| C |
674 |
Flexural
Properties of Ceramic Witeware Materials |
| C |
695 |
Test
method for Compressive Strength of Carbon and Graphite) |
| C |
882 |
Test
Methods for Bond Strength of Epoxy-Resin systems Used with Concrete |
| C |
952 |
Test
Method for Bond Strength of Mortar to Masonry Unit |
| C |
1147 |
Practice
for determing the Short Term Tensile Weld Strength of Chemical-Resistant
Thermoplastics |
| C |
1161 |
Test
Methods for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| C |
1194 |
Test
Method for Compressive strength of Architectural Cast Stone |
| C |
1273 |
Test
method for tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
| |
|
|
| D |
76 |
Specification
for Tensile Testing Machines for Textiles |
| D |
143 |
Method
of Testing Small Clear Specimens of Timber |
| D |
395 |
Test
Method for Rubber Property - Compression Set |
| D |
412 |
Test
Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic
Elastomers-Tension |
| D |
413 |
Test
Methods for Rubber Property - Adhesion to Flexible Substrates |
| D |
419 |
Test
Methods for Rubber Property - Adhesion to Rigid Substrates |
| D |
434 |
Test
Methods for Resistance to Slippage of Yarns In Woven Fabrics Using a
Standard Seam |
| D |
575 |
Test
Methods for Rubber Properties in Compression |
| D |
624 |
Test
Methods for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| D |
638 |
Test
Methods for Tensile Properties of Plastics |
| D |
695 |
Test
Methods for Compressive Properties of Rigid Plastics |
| D |
732 |
Test
Methods for Shear Strength of
Plastics By Punch Tool |
| D |
751 |
Test
Methods for Coated Fabrics |
| D |
790 |
Test
Methods for Flexural
Properties of Unreinforced and Reinforced Plastics and Electrical
Insulating Materials |
| D |
816 |
Test
Methods for Rubber Cement |
| D |
828 |
Test
Methods for Tensile Properties of Paper and Paperboard Using
Constant-Rate-of -Elongation Apparatus |
| D |
882 |
Test
Methods for Tensile Properties of Thin Plastic Sheeting |
| D |
885 |
Test
Methods for Tire Cords, Tire cord Fabrics, and Industrial Filament Yarns
Made from Man-Made Organic-Base Fibers |
| D |
897 |
Test
Methods for Tensile Properties of Adhesive Bonds |
| D |
903 |
Test
Method for Peel or Stripping Strength of Adhesive Bonds |
| D |
906 |
Test
Methods for Strength Properties of Adhesives in Plywood Type Construction
in Shear by Tension Loading |
| D |
952 |
Test
Method for Bond or Cohesive Strength of Sheet Plastics and Electrical
Insulating Materials |
| D |
953 |
Test
Methods for Bearing Strength of Plastics |
| D |
1002 |
Test
Methods for Apparent Shear Strength of Single - Lap -Joint Adhesively
Bonded Metal Specimens by Tension Loading |
| D |
1004 |
Test
Methods for Initial Teat Resistance of Plastic Film and Sheeting |
| D |
1037 |
Test
Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel
Materials |
| D |
1056 |
Specification
for Flexible Cellular Materials-Sponge or Expanded rubber |
| D |
1062 |
Test
Methods for Cleavage Strength of Metal - to - Metal Adhesive Bonds |
| D |
1074 |
Test
Method for Compressive Strength of Bituminous Mixtures |
| D |
1117 |
Test
Method of Testing Non Woven Fabrics |
| D |
1414 |
Test
Methods for Rubber O-Rings |
| D |
1421 |
Test
Methods for Compressive Properties of Rigid Cellular Plastics |
| D |
1621 |
Test
Method of Compressive Properties of Rigid Cellular Plastics |
| D |
1623 |
Test
Methods for Tensile And Tensile Adhesion Properties of Rigid Cellular
Plastics |
| D |
1682 |
Replaced
by D-5034 and D-5035 |
| D |
1708 |
Test
Methods for Tensile Properties of Plastics by Use of Micro tensile
Specimens |
| D |
1761 |
Test
Method for Mechanical Fasteners in Wood |
| D |
1774 |
Test
Methods for Elastic Properties of Textile Fibers |
| D |
1775 |
Test
Methods for Tension and Elongation of Wide Elastic Fabrics |
| D |
1781 |
Test
Methods for Climbing Drum Peel for Adhesives |
| D |
1876 |
Test
Methods for Peer Resistance of Adhesives (T-Peel Test) |
| D |
1893 |
Test
Methods for Blocking of Plastic Film |
| D |
1894 |
Test
Methods for Static and Kinetic Coefficients of Friction of Plastic Film
and Sheeting |
| D |
1938 |
Test
Methods for Tear Propagation Resistance of Plastic Film and Thin Sheeting
by a Single - Tear Method |
| D |
2166 |
Test
Method for Unconfined Compressive Strength of Cohesive Soil |
| D |
2209 |
Test
Methods for Tensile Strength of Leather |
| D |
2213 |
Test
Method for Compressibility of Leather |
| D |
2343 |
Test
Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings
Used in Reinforced Plastics |
| D |
2256 |
Test
Methods for Tensile Properties of Yarns by the Single-Strand Method |
| D |
2261 |
Test
Methods for Tearing Strength of Fabrics by the Tongue (single Rip)
Procedure (CRE Tensile Testing Machine) |
| D |
2287 |
Specification
for Non Rigid Vinyl Chloride Polymer & Copolymer Molding &
Extrusion Compounds |
| D |
2290 |
Test
Methods for Apparent Tensile Strength of Ring or Tubular Plastics and
Reinforced Plastics by Split Disk Method |
| D |
2344 |
Test
Methods for Apparent Interlaminar Shear Strength of Parallel Fiber
Composites by Short-Beam Method |
| D |
2370 |
Test
Method for Tensile Properties of Organic Coatings |
| D |
2659 |
Test
Methods for Column Crush Properties of Blown Thermoplastics Container |
| D |
3039 |
Test
Methods for Tensile Properties of Polymer Matrix Composite |
| D |
3044 |
Test
Method for Shear Modulus of Structural Panels |
| D |
3165 |
Test
Methods for Strength Properties of Adhesives in Shear by Tension Loading
of Single-Lap-Joint Laminated Assemblies |
| D |
3167 |
Test
Method for Floating Roller Peel Resistance of Adhesives |
| D |
3330 |
Test
Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Angle |
| D |
3354 |
Test
Method for Blocking Load of Plastic Film by the Parallel Plate Method |
| D |
3379 |
Test
Methods for Tensile Strength and Young's Modulus for High-Modulus
Single-Filament Materials |
| D |
3410 |
Test
Methods for Compression of Unidirectional Polymer Matrix Composites
Materials with Unsupported gage section |
| D |
3501 |
Test
Methods for Wood-Based Structural Panels in Compression |
| D |
3519 |
Standard
Practice for In-Plane Shear Stress-Strain Response of Unidirectional Polymer
Matrix Composites |
| D |
3528 |
Test
Methods for Strength Properties of Double Lap Shear Adhesive Joints by
Tension Loading |
| D |
3552 |
Test
Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites |
| D |
3574 |
Test
Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams |
| D |
3575 |
Test
Methods for Flexible Cellular Materials made from Olefin Polymers |
| D |
3759 |
Test
Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
| D |
3822 |
Test
Methods for Tensile
Properties of Single Textile Fibers |
| D |
3846 |
Test
Methods for In-Plane Shear Strength of Reinforced Plastics |
| D |
3914 |
Test
Methods for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic
Rod |
| D |
3916 |
Test
Method for Tensile Properties
of Pultruded Glass-Fiber-Reinforced Plastics |
| D |
4018 |
Test
Methods for Tensile Properties of Continuous Carbon and Graphite Yarns ,
Strands , Roving and Tows |
| D |
4255 |
Standard
Guide for Testing Inplain Shear Properties of Composites Laminates |
| D |
4476 |
Test
Methods for Flexural Properties of Fiber Reinforced Pultuded Plastic Rods |
| D |
4541 |
Test
Method for Pull Off Strength of Coatings Using Portable Adhesion Testers |
| D |
4595 |
Test
Method for Tensile Properties of Geotextiles by the Wide-Width Strip
Method |
| D |
4831 |
Test
Method for Buckle Tear Strength of Leather |
| D |
4833 |
Test
Method for Index Puncture Resistance of Geotextiles, Geomembranes &
Related Products |
| D |
4851 |
Test
Methods for Coated and Laminated Fabrics for Architectural Use |
| D |
4885 |
Test
Method for Determing Performance Tensile Strength of Geomembranes Using
Wide Strip Testing |
| D |
4964 |
Test
Methods for Tension and Elongation of Elastic Fabrics (Constant-rate-
of-Extension Type Tensile Testing Machine) |
| D |
5034 |
Test
Methods for Breaking Strength and Elongation of Tensile Fabrics (Grab
Test) |
| D |
5035 |
Test
Methods for Breaking Force and Elongation of Textile Fabrics (Strip
Method) |
| D |
5169 |
Test
Method for Shear Strength (Dynamic Method) of Hook & Loop Touch
Fasteners |
| D |
5170 |
Test
Method for Peel Strength ("T" Method) of Hook & Loop Touch
Fasteners |
| D |
5179 |
Test
Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by
Direct Tensile Testing |
| D |
5379 |
Test
Methods for Shear Properties of Composite Materials by the V-Notched Beam
Method |
| D |
5459 |
Test
Method for Machine Direction Elastic Recovery & Permanent deformation
& Stress Retention of Stretch wrap Materials |
| D |
5587 |
Test
Methods for Tearing Strength of Fabrics by Trapezoid Procedure |
| D |
5656 |
Test
Method for Metal Lap-Shear Joints for Stress-Strain Behavior of Adhesives
in Shear by Tension Loading |
| D |
5672 |
Test
Methods for Testing Flexible Cellular Materials Measurement of Indentation
Force Deflection |
| D |
5733 |
Test
Methods for Tearing Strength of Nonwoven Fabrics by the Trapezoid
Procedure |
| D |
5735 |
Test
Method for Tearing Strength of Non-woven Fabrics by the Tongue (Single
Rip) Procedure (CRE Tensile Testing Machine) |
| D |
5801 |
Test
Method for Toughness & Tenacity of Bituminous Materials |
| D |
6117 |
Test
Methods for Mechanical Fasteners In Plastic Lumber and Shapes |
| D |
6195 |
Test
Methods for Loop Tack |
| D |
6272 |
Test
Method for Flexural Properties of Unreinforced and Reinforced Plastics and
Electrical Insulation by Four-Point Bending |
| D |
6381 |
Test
Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance |
| |
|
|
| E |
4 |
Test
method for Force Verification of Testing Machines |
| E |
8 |
Test
method for Tension Testing of Metallic Materials |
| E |
9 |
Test
Methods for Compression Testing of Metallic Materials at Room Temperature |
| E |
21 |
Test
method for Elevated Temperature Tension Test of Metallic Materials |
| E |
74 |
Practice
of Calibration of Force Measuring Instruments for Verifying the Load
Indication of Testing Machines |
| E |
83 |
Standard
Practice of Classification of Extensometers |
| E |
111 |
Test
Method for Young's Modulus , Tangent Modulus and Chord Modulus |
| E |
132 |
Test
Method for Poisson's Ratio at Room Temperature |
| E |
143 |
Test
Method for Shear Modulus at Room Temperature |
| E |
209 |
Standard
Practice for Compression Test of Metallic Materials at Elevated
Temperature |
| E |
238 |
Test
Method for Pin-Type Bearing Test of Metallic Materials |
| E |
338 |
Test
Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials |
| E |
345 |
Test
Method of Tension Testing of Metallic Foil |
| E |
399 |
Test
Method of Plane-Strain Fracture Toughness of Metallic Materials |
| E |
517 |
Test
Method for Plastic Strain Ratio for Sheet Metal |
| E |
602 |
Test
Method for Sharp-notch Tension Testing with Cylindrical Specimen |
| E |
646 |
Test
Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic |
| E |
855 |
Test
Method for Bend Testing of Metallic Flat Materials for Spring Applications
Involving Static Loading |
| E |
1737 |
Test
Method for J-Integral Characterization of Fracture Toughness |
| |
|
|
| F |
88 |
Test
Method for Seal Strength of Flexible Materials |
| F |
152 |
Test
Methods for Tension Testing of nonmetallic Gasket Materials |
| F |
382 |
Recommended
Practice for Static Bend Testing of Bone Plate |
| F |
383 |
Standard
Practice for Static Bend and Torsion Testing of Intramedullary Rods |
| F |
384 |
Standard
Practice for Static Bend Testing of Nail Plate |
| F |
606 |
Test
Method for Determining Mechanical Properties of Threaded Fasteners |
| F |
1575 |
Test
Method for Determining Bending Yield Moment of Nails |
