95D Series Test Systems


800-552-5546	sales@com-ten.com	Catalog Request

95D Series

These non-automated variable speed test stands provide general purpose testing to ASTM standards. Force is shown on Digital Force Meter. Controller has up/down/stop motor control. Includes Digital Force System with an S-Block Load Cell of your choice, accurate to 0.1% full scale. Captures continuous and peak load in pounds, kilograms, newtons, ounces, and grams. Serial port can be used for downloading data to a PC or to print test reports directly to an optional mini serial printer (MSP242). Upper and lower limit travel switch is standard. These low cost testers are ideal for testing needs on laboratory or on the production floor.

Click to view: Full Specs & Lit

Capacity between 10 - 5000 pounds
Digital force readout in lb, kg, N, g, oz
Force accuracy: +/- 0.1% full scale
Fast & Easy fastener and Plug & Play sytem for cells
Sample rate: 20 / second
Display rate: 1-8 / second, selectable
Overload protection
Peak hold future on force
Deflection readout: digital (in, cm, mm)
Deflection accuracy: +/- .008 inch
Position jog
High speed return
Drive control: DC variable and regulated speed motor with dynamic brake
Test stand control: manual with front panel switches
Speed readout: digital (in/min, mm/min, cm/min)
Speed accuracy: +/- 2.0% of reading
Data output: RS232 standard serial force output or optional report printer
Travel limits manually adjustable upper & lower magnetic limit switch
Tensile testing: yes
Compression testing: yes, with optional compression cage
Power requirement: 110 V, 50-60 Hz (220 V, 50-60 Hz optional)

Options :

Safety guard to protect from breaking sample
Dust cover : guard against dirt and dust that could damage the test stand

Providing affordable material testing technologies for production and quality assurance since 1960.

6405 49th Street North, Pinellas Park, FL 33781 • Phone: 727-520-1200 • Fax: 727-520-0299 • sales@com-ten.com