|
STANDARD
GRIPS
|
|
|
LFS
0250
For
standard roofing screws
Capacity:
2000 lb (900 kg)
Shank:
1/4" (6.0 mm)
Head:
5/8" (15.8 mm)
|
|
|
LFN
0468
For
NTB type fasteners
Capacity:
2000 lb (900 kg)
Shank:
15/32" (11.9 mm)
Head:
2.0" (50.8 mm)
|
|
|
LFR
0437
For
Rawl type fasteners
Capacity:
2000 lb (900 kg)
Shank:
7/16" (11.1 mm)
Head:
1.0" (25.4 mm)
|
|
|
LFH
3500
For
heavy duty deckplates
Capacity:
1000 lb (450 kg)
Shank:
7/8" (22.2 mm)
Head:
3.5" (88.9 mm)
|
|
|
LFS
4xxx
For
high capacity anchors and fasteners
Capacity:
4000 lb (1800 kg)
Shank:
specify to 1/2" (12.7 mm)
Head:
1" (25.4 mm)
|
|
LIGHTWEIGHT
GRIPS
|
|
|
LFL1500,
LFL2250, LFL3000, or LFL3500
For
use with deckplates
Capacity:
300 lb (65 kg)
Shank:
7/8" (22.2 mm)
Head:
0.75-3.5" depending on model
|
|
|
LFF
3500
Specifically
designed to meet Dade County Protocol PA105-A. This design mimics the
actual movements of roof membranes as they pull on a fastener during
uplift.
Capacity:
300 lb (65 kg)
Shank:
5/8" (15.9 mm)
Head:
1.25-3.5" (32-89 mm)
|
|
COMPRESSION
FIXTURES
|
|
|
FCF
0400 FOAM COMPRESSION
FIXTURE
Patented
fixture to test the compression strength of polyurethane foam onsite.
Attaches to a standard Com-Ten fastener tester.
See
full PDF specs & lit here
Capacity:
400 lb (180 kg)
Diameter:
4" (102 mm)
Thickness:
4" (102 mm)
|
|
|
FCC
0225 FOAM CORE CUTTER
Cuts
a 2.25 inch diameter sample to be used in Com-Ten's FCF 0400 foam
compression fixture.
Diameter:
2.25" (57.2 mm)
Area:
4 sq. in. (25.7 sq cm)
|
|
UPLIFT
& ADHESION FIXTURES
|
|
|
URF
2424 UPLIFT RESISTANCE
FIXTURE
Designed
to test the performance of all types of insulation adhesives. It is
primarily intended when an existing roofing system is being replaced and
the general conditions of the substrate in question are in doubt as well
as for new construction. Attaches to Com-Ten's standard fasteners tester
frames.
Max
Size: 24 x 24 in (61 x 61 cm)
Area:
4 sq. ft. (3716 sq. cm.)
Capacity:
2000 pounds (900 kg)
|
|
|
TLF 1120
Tile Lifter Foot for testing uplift strength
of in-place tiles
Max Thickness: 0.75" (19 mm)
Capacity: 400 lb (180 kg)
|
|
|
LFM
225D
Disposable
Membrane Adhesion Adapter
Diameter:
2.25" (57.2 mm)
|
|
|
LFM
225R
Reusable
Membrane Adhesion Adapter
Diameter:
2.25" (57.2 mm)
LFM
400R
Reusable
Membrane Adhesion Adapter
Diameter:
4" (101.6 mm)
|
