Connected to a large range of torque sensors,the CENTOR become a very
accurate and solid digital torque gauge.All fonctions and posibilities
of the instrument are aviable for measuring torsion as well in a EASY
or in a STAR version.
A digimatic output can be used to feed Mitutoyo statistical printers.
With TH “handle” sensor, low torque levels: used to measure low torque
levels, screwing torque settings, or operating switches. The sensor is
protected mechanically from overloads.
Technical characteristics
Characteristics of EA and ST versions
- Operates in Clockwise and anti-clockwise direction
- Accuracy 0.5% FS
- Resolution: 1/10 000 FS
- Peak function in both directions
- Simultaneous display of the peak and the current reading
- Bar graph
- 3 units available: Nm, kg.cm, mNm
- Sampling rate 1 000 Hertz
- Can be used with a pedal
- Tare function
- Auto-off adjustable from 5 to 15 min, can be deactivated
- Programmable set point function
- Two-way RS232 output: transmission of current reading, minimum, or maximum values
- Digimatic output
- 8 hours of operation without recharging.
- Fast charge
- Reversible display
- Backlit display
- Operates on rechargeable batteries
- Low battery indicator
- Memorizes its configuration
- Metal casing with protective elastomer overmould
- Calibration certificate included
- Supplied in a carrying case with a mains adaptor
Characteristics available on ST version
- Display of the Torque/Time graph
- Calculations of specific points in the graph:
• Maxima
• Torque at time T
• Break point
• Derivative
• First peak
• Torque on opening/closing of contact
• Average torque
- Memorization of the last graph curve measured.
- Programmable set point functions
- Two-way RS232 output: transmission of the current reading, minimum, peak or calculation
- Running transmission of 50 values per second
- Possibility of transmitting the graph curve memorized
- Memorization of 2 configurations
- current configuration Protection function (locking)
- Automatic recognition of additional sensors
Models
Capacities
Price
lbFin
kgFcm
Nm
EA
ST
CNR TH 0.12
1
1.2
0.12
CNT TH 0.3
2.4
3
0.3
CNT TH 1.5
12
15
1.5
CNT TH 6
50
60
6
CNT TH 12
100
120
12
Providing affordable material
testing technologies for production and quality assurance since 1960.
6405 49th Street North, Pinellas Park, FL 33781 •
Phone: 727-520-1200 • Fax: 727-520-0299 •
sales@com-ten.com
