Thanks to its ability to read two sensors simultaneously with a
sampling rate of 1 000 Hertz, the CENTOR Dual is a real test console.
It has all the functions of an STAR force gauge, but its calculation
power enables it to record values sent by 2 different sensors
simultaneously, monitor set points and make a calculation on each
channel.
It can also show an F1/F2 graph or a Force/Displacement graph on its
display, because it is also able to read potentiometric rulers and
incremental encoders.
It provides the simplest, most modular and most versatile system for
dealing with the most wide-ranging and varied tests in the workshop or
in the laboratory.
Technical characteristics
- Simultaneous readings on 2 channels
- Operates in Tension and compression
- Accuracy 0.1% FS
- Resolution: 1/10 000 FS
- Peak function for tension and compression
- Simultaneous display of the peak and the current reading
- Display of the Force/Displacement graph
- Calculations of specific points in the graph for each channel:
•Maxima
•Force at time T
•Break point
•Derivative
•First peak
•Force on opening/closing of contact
•Average force
•Force for a given displacement
- Memorization of the last graph curve measured
- Bar graph
- 5 units available: N, kg, Lbs, g, Oz
- Sampling rate 1 000 Hertz
- Can be used with a pedal
- Tare function, separate on each channel
- Automatic tare possible at the beginning of the graph curve
- Auto-off adjustable from 5 to 15 min, can be deactivated
- Programmable set point functions for each channel
- Full two-way RS232 output
- Running transmission of 25 value pairs per second
- Possibility of transmitting the graph curve memorized
- Digimatic output
- Memorization of 2 configurations
- Protection function for the current configuration
- Automatic recognition of additional force or torque sensors
- Recognition of incremental displacement sensors
(angular encoders or linear rulers)
- Reversible display
- Backlit display
- Sensor protected from overloads up to 200% of its capacity
- Operates on rechargeable batteries
- 8 hours of operation without recharging
- Fast charge
- Low battery indicator
- Metal casing with protective elastomer overmould
- Threaded fixing holes on the back for use on test stand
- Calibration certificate included
- Supplied in a carrying case with mains adaptor and set of accessories
Models
Capacities (Force)
Resolution (Force)
Designation
CNR DL 10
2 lb
0.0002 N
CENTOR DUAL 2lb FORCE GAUGE
CNR DL 100
20 lb
0.002 N
CENTOR DUAL 20lb FORCE GAUGE
CNR DL 250
50 lb
0.005 N
CENTOR DUAL 50lb FORCE GAUGE
CNR DL 500
100 lb
0.01 N
CENTOR DUAL 100lb FORCE GAUGE
CNR DL 1KN
200 lb
0.02 N
CENTOR DUAL 200lb FORCE GAUGE
Providing affordable material
testing technologies for production and quality assurance since 1960.
6405 49th Street North, Pinellas Park, FL 33781 •
Phone: 727-520-1200 • Fax: 727-520-0299 •
sales@com-ten.com
