Call Us: 800-552-5546
Com-Ten Industries
Full Site Search
Products  Categories
Force gauge Centor Force gauges
Torque gauges Torque gauges
Digital indicators Centor series Digital indicators
Fastener pull tester Pull testers
Manual test stand for force gauge Centor Manual test stands
Motorized test stand Motorized test stands
Automated single column test stand 701 Automated test stands
Torque and torsion test benc Twist Torque benches
Torque calibration Centormeter Torque analyzers
Software for automated test stand and force-torque gauges Software
Grips and fixtures Grips and fixtures
Wedge clamps
Flat anvils clamps
Vise-grips
Compression platens
Adjustable bending fixture
Peg type grips
Spool type holders
Eccentric self-closing clamps
Wire and cable fixtures
Wire terminal fixtures
Peeling fixtures and sliding tables
Air operated clamps
Special and custom fixtures
Large range load cell and force sensor Force sensor
Torque sensor and Centor torque gauge Torque sensors
Bottle torque tester anditork Bottle testers
WireTest series measure force wire Wire testers
Motorized spring tester Spring testers
Ergonomy force kit-Ergokit Ergonomics
Special application Topload Special applications
Subscribe
Want to receive last information about force and torque measurement! Please enter your email address in the box below to subscribe our newsletter and press 'Subscribe' button.

Grips and fixtures
Grips and fixtures Andilog Technologies has today one of the most important range of clamps, fixtures, platens, grips... in stock ready to be shipped.

Looking for the best fixture to test your samples? Rely on our grips for force gauge and automated test stand
Products  Categories
Self-closing wedge clamp
Wedge clamps
Our most popular clamp! Extra strong self-closing sliding wedges for sure, fast clamping action on many materials: plastic, metal, rubber, wire, composite...
 Flat anvils clamp
Flat anvils clamps
Flat anvils clamp ideal for fabric, plastic, film, membranes, sheet...
Vise-grips
Vise-grips
Ideal to grip small samples quickly using the quick action screw. Ideal for plastics, electronic components...
 Plate
Compression platens
Compression platens constructed of aluminum or steel used to provide a testing surface on which to place samples. Various materials, shapes, and sizes available !
Bending fixture
Adjustable bending fixture
Adjustable three and point bending or rocking anvil fixture for Modulus of rupture testing.
 Peg type grips
Peg type grips
Peg type grips for holding items such as O-rings, button-hole tests, pulley belts, rubber bands...
Spool type holder
Spool type holders
Spool type holder ideal for strapping, belting and flexible strip materials.
 Eccentric self-closing clamps
Eccentric self-closing clamps
Eccentric self-closing cam clamps for samples up to one inch wide and .375 inch thick.
Wire and cable fixtures
Wire and cable fixtures
Fixture for wire, yarn and cable.
 Wire terminal fixtures
Wire terminal fixtures
Wire terminal fixtures.
Peeling and frition fixtures
Peeling fixtures and sliding tables
Fixtures for 90° and 180° peeling tests, sliding tables for coefficient of friction.
Air operated clamps
Air operated clamps
Air operated clamps to guarantee a steady pressure on samples to prevent slippage.
Special and custom fixtures
Special and custom fixtures
Special and customs fixtures manufactured for ASTM tests, ISO test or IPC.
Grips and fixtures
Film and paper flat grip Film and paper flat grip - 500 N
Film and paper flat grip - 500 N - Designed for force gauges and small capacities.
 PriceLogin
mini self-closing wedge clamp Mini self closing wedge clamp
Mini self closing wedge clamp for force up to 500N, fast clamping action on metal, plastic, rubber, wires and many other materials.
 PriceLogin
Adjustable hardened anvils clamps Adjustable hardened anvils clamps 400 lb
Adjustable center clamps for holding flat stock to 2.25 inch wide by 1.2 inch thick.
PriceLogin
Locking cam fixture - 50 lb Locking cam fixture - 50 lb
Locking cam fixture for samples that have a relatively low breaking forces.
PriceLogin
Self closing cam clamp - 500 lb Self closing cam clamp - 500 lb
Used for strapping, belting, and other flexible strip material.
 PriceLogin
Coefficient of friction test fixture - ASTM D1894 Coefficient of friction test fixture - ASTM D1894
When you need to test the friction coefficient of a material or surface, this fixture is ideal.
 PriceLogin
Support jig fixture - ASTM D695 Support jig fixture - ASTM D695
Support jig fixture for ASTM D695, Standard Test Method for Compressive Properties of Rigid Plastics.
 PriceLogin
Self closing cam clamp - 500 lb Wide self closing cam clamp - 500 lb
Used for strapping, belting, and other flexible strip material.
 PriceLogin
Self closing cam clamp - 500 lb Wide self closing cam clamp - 2000 lb
Used for strapping, belting, and other flexible strip material.
 PriceLogin
Adjustable hardened anvils clamps Adjustable hardened anvils clamps 600 lb
Adjustable center clamps for holding flat stock to 1 inch wide by 0.375 inch thick.
PriceLogin
Three points bending anvils fixture Three points bending anvils fixture for small capacities
3-point bending fixture. Anvil width 2", adjustable in 1" intervals
PriceLogin
Filament and thread holder - 200 lb Filament and thread holder - 200 lb
Easy to load grip for fine thread, wire and filaments.
PriceLogin
Roller peel fixture for ASTM D3167 Roller peel fixture for ASTM D3167
Peel fixture with roller ball bearings for testing the adhesive strength of a substrate to a material per ASTM D3167.
 PriceLogin
Roller peel fixture for ASTM D3167 Climbing drum peel fixture for ASTM D1781
Climbing drum peel fixture for the ASTM D1781.
PriceLogin
flat anvils clamps for plastic, fabric, rubber Fabric and packaging flat anvils clamps - 500 lb
Manually operated open-side anvil clamps for fabric tear tests, holds sheets up to 2 inches wide by .25 inch thick. Clamping knob provides excellent grip strength. For fabric, plastics, foil, etc.
PriceLogin
Three points bending anvils fixture Three points bending anvil fixture
3-point bending fixture. Anvil width 4", adjustable in 1" intervals
PriceLogin
Small vise grip for small samples Small vise grip - 100N
Ideal for small components. Designed to be used with a force gauge.
PriceLogin
Aluminum compression plate 0.78 in Aluminum compression plate 20mm
Aluminum compression plate 20mm
PriceLogin
Aluminum compression plate 4 in Aluminum compression plate 100mm
Aluminum compression plate diameter 100mm
PriceLogin
Yarn skein grip - 200 lb Yarn skein grip - 200 lb
Yarn skein fixture for samples up to 1.125" wide
PriceLogin
Large peg-type holder - 500 lb Large peg-type holder - 500 lb
Large peg-type holder for samples up to 3 in wide.
PriceLogin
Rotating peg-type holder - 2000 lb Rotating peg-type holder - 2000 lb
Rotating peg-type holder for samples up to 0.5 in wide.
PriceLogin
Fixed peg-type holder - 2000 lb Fixed peg-type holder - 2000 lb
Peg-type grips for holding items such as O-rings, button-hole tests, pulley belts, rubber bands, etc
 PriceLogin
Small vise grip for small samples Small vise grip for small samples 50 lb
Ideal for small components, grip opening 0.28 in, capacity 50 lbs.
PriceLogin
Vise grip for wide samples Vise grip for wide samples - 225 lb
Vise grip for wide samples up to 2 in, grip opening 0.31 in, capacity 225 lbs.
PriceLogin
 
  [ 1 of 2 ] Next Last  
Your Cart
Your shopping cart is empty!
Products  Top Viewed
Simple Force Gauge Centor First 1. Centor First, simple manual digital force gauge (8661)
Digital fastener pull tester 2. Digital pull tester without grips (6896)
Graphical Force Gauge Centor Easy 3. Centor Easy, graphical force gauge (6658)
analog fastener pull tester 4. Analog pull tester without grips (6318)
News| About us| | FAQ| Knowledge base| Events| Site Map| Terms & conditions| News

Com-Ten Industries, for force gauge, pull tester and torque tester products

Measuring force from Apple to Zipper since 1960.
6405 49th Street North, Pinellas Park, FL 33781 • Phone: 727-520-1200 • Fax: 727-520-0299 • sales@com-ten.com
SSL